Voir le texte source

The first and most simple step to decide to try extend your air-conditioners life is always to change the filter. You should change it whenever it gets dirty. With respect to the use, that could range from every three to six months. The.. If you simply take care of the ac unit, you could extend its life and get the most use out of it. Generally you need to be able to do a lot of the maintenance yourself. Discover new resources on our affiliated website - Click here:  [http://www.mydzkj.com/learn-and-knowledge-air-conditioning-and-power-performance-ratio-eer-ratings/ Learn And Knowledge Air-conditioning and Power Performance Ratio (EER) Ratings | mydz] . But, in the more serious cases, it'd be better to employ a specialist. The first and most simple step to try increase your air conditioners life is always to change the filter. You need to change it when it gets dirty. With respect to the application, that may range from every three to six months. There are a few filters out there, which could last up to a year. Ask someone within the hardware store for more tips! Annually be sure that you always check the evaporator coil located within the air handler to create sure there's no dirt build up. Once the weather starts to cool you need to check the outside the air-con. Browse here at the link  [http://ameblo.jp/skateepoch5/entry-11569918236.html air conditioning contractors austin]  to check up the inner workings of it. You must search around for the machine and be sure there's no dirt on top of the condenser which will stop ventilation. Also you should check involving the fins of the condenser to-see that its not connected with dead bugs or pollen. Spraying the condenser having a line will usually be adequate to get rid of all the trash. Although a lot of air conditioners today use direct drive motors, it is recommended to test the belt in the air handler. You might have to restore it. If no change is necessary, you could only have to oil the engine bearings once a year. It's also good to check contactors and other electrical; most of them are situated inside the condensing system. The contactor operates the compressor and the contacts get rough and must be replaced occasionally. Different manufacturers use different varieties of contactors so check the manual to locate the type you-need.