RC Helicopter Blade Tracking

De WikiCinéjeu.

m (RC_Helicopter_Blade_Tracking)
m (RC_Helicopter_Blade_Tracking)
Ligne 1 : Ligne 1 :
-
If you are not positive if [http://community.babycenter.com/journal/pain2swiss/10540204/rc_helicopter_blade_monitoring RC Helicopter Blade Monitoring] it really is monitoring properly, do this:
+
You can [http://www.myfaceclick.com/blog/190012/rc-helicopter-blade-monitoring/ Blade 450 RC Helicopter Overview] check the blade tracking by basically hovering the helicopter in area at eye degree and seeking at the blades as it hovers. Put a purple strip on 1 blade and a blue strip on  [http://kampusagi.com/index.php?p=blogs/viewstory/493011 RC Helicopter Blade Tracking] the other blade. As you look at the blades spin, you'll know if they're in observe if you only see a one circle or the two blades spinning on one line. If you see two circles or two traces, (purple over blue or vice versa) then you'll know that one of the blades are off and wants to be aligned.
-
By utilizing [http://beta.truck.net/blogs/486885/713058/blade-450-rc-helicopter-critique Blade 450 RC Helicopter Overview]  a various shade on each and every blade, it helps make it a great deal much easier to see which blade may be out of keep track of.
+
To effectively keep track of your rotor blades, you need to have to land the hovering RC helicopter initially. Immediately after the blades have stopped spinning, you can regulate the blade that is out of alignment. You'll want to have your RC helicopter guide helpful so that you can glance up the proper blade monitoring information in it. Be confident that you adjust the proper linkages in what the handbook says and not what somebody says. This is the ideal way to be positive that you've completed it accurately.
-
Right after the blades have stopped spinning, you can alter the blade that is out of alignment. You'll need to have to have your RC helicopter handbook handy so that you can seem up the proper blade tracking information in it. Be certain that you alter the proper linkages in what the manual says and not what somebody claims. This is the very best way to be absolutely sure that you've performed it effectively.
+
As soon as you've tightened or loosened the right linkage or linkages, you will need to have a person fly the helicopter once more so that you can search at the blades. You will repeat this approach as usually as wanted until finally your blades are tracked properly and they spin on the similar airplane. When you have concluded appropriate blade monitoring, your RC helicopter will handle a whole lot smoother than it did ahead of and be significantly easier to fly.
-
As soon as you've tightened or loosened the right linkage or linkages, you will need to have an individual fly the helicopter yet again so that you can seem at the blades. You are going to repeat this method as usually as necessary until your blades are tracked appropriately and they spin on the exact same airplane. After you have concluded proper blade monitoring, your RC helicopter will deal with a ton smoother than it did in advance of and be considerably easier to fly.
+
RC helicopter blade monitoring has been a mystery to numerous new RC helicopter house owners, but I'm going to demystify the total idea for you proper now so that you are going to have a comprehensive comprehension of blade monitoring by the time you complete looking at this post.
-
RC helicopter blade monitoring has been a secret to quite a few new RC helicopter owners, but I'm likely to demystify the full notion for you correct now so that you are going to have a total knowing of blade monitoring by the time you end looking through this write-up.
+
Get two various colors of tape and use a modest strip of one colour to 1 blade. Place a pink strip on one particular blade and a blue strip on the other blade. By utilizing a various color on every blade, it helps make it a whole lot less difficult to see which blade might be out of track.
-
[http://www.awebcafe.com/blogs/viewstory/2676553 Blade 450 RC Helicopter Review]
+
-
Very first, we need to remedy this significant concern: What is blade tracking?
+
-
Fundamentally, blade tracking is when just one rotor blade rotates in a circular motion and the subsequent blade follows specifically guiding it. Both equally rotor blades spin on the exact same aircraft without having one particular blade currently being greater or reduced than the blade it is really subsequent. One more way to search at it is that each blades vacation through the same airspace created by their spinning. If the rear blade is following the entrance blade on a increased or decreased aircraft, then it can lead to a whole lot of unwanted vibrations for the RC helicopter.
+
Now that you've applied the colored tape, have an seasoned RC helicopter pilot hover the helicopter in position so that you can see the blades as they spin. As you watch the blades spin, you will know if they're in keep track of if you only see a one circle or both blades spinning on 1 line. If you see two circles or two lines, (red previously mentioned blue or vice versa) then you are going to know that one particular of the blades are off and wants to be aligned.
-
How To Track Your Blades
+
To properly track your rotor blades, you want to land the hovering RC helicopter first. After the blades have stopped spinning, you can alter the blade that is out of alignment. You'll need to have your RC helicopter manual helpful so that you can seem up the correct blade tracking data in it. [http://www.nexopia.com/users/canoedecade6/blog/4-rc-helicopter-blade-tracking Blade 450 RC Helicopter Critique]
-
 
+
-
If you're traveling your RC helicopter for the very first time, you need to have to see if the blades are monitoring correctly and you may well will need some assist from an expert RC helicopter pilot. You can check the blade tracking by just hovering the helicopter in position at eye level and wanting at the blades as it hovers. If you see a whole lot of shaking and vibrating, your RC helicopter is more than very likely not monitoring properly. If you are not sure if it is really monitoring effectively, do this:
+
-
 
+
-
Get two unique colors of tape and apply a little strip of 1 shade to one blade. Place a crimson strip on a single blade and a blue strip on the other blade. By employing a unique color on every single blade, it helps make it a whole lot easier to see which blade could be out of observe.
+

Version du 25 juillet 2013 à 13:03