Voir le texte source

three)Position the leads of a high wattage resistor on the prospects of the capacitor.I use a two.2k ohm ten watt resistor to discharge the high voltage capacitor in a switch manner electric power supplies. It is straightforward to use and extremely productive .It normally takes only pair ofseconds to entirely discharge the capacitor.

Summary

I strongly propose for people who use screw driver to discharge a capacitor to swift to the next and third strategy as these is the most secure system [http://www.makemesustainable.com/groups/390350 Ceramic Disc Capacitor - How to Accurately Test It]  to defend the circuit and most importantly is on your own.

Change mode electricity provide include some substantial filter capacitors that can keep dangerous prices even if the device has not been applied for several times. Regular values of this sort of filter capacitor are 220uf 250volt and 330uf 400volt! If you are heading to work on the energy offer circuits, it's a excellent idea to discharge that capacitor very first.

There are a few ways to discharge the major filter capacitor in a electric power offer.

1)Discharge it with a screw driver (not encouraged).

The cause for not using the screw driver to discharge a capacitor is simply because

-the printed circuit board or circuitry can be injury because of to the spark produced when discharging the high voltage capacitor.I the moment blowed the energy segment making use of this method. Even so, if you know that the capacitor stored voltage is not also large, you can effortlessly discharge it with a modest screw driver.

-if the capacitor retains a heavier cost of electricity. Discharging the capacitor may melt the tip of the screw driver and the copper on the printed circuit board.

-Sometimes a heavier spark may well lead to smaller disintegrated solder direct or copper to fly out from the circuit board and may well wounded your eyes.

2)Place the leads of a socketed a hundred watt electrical bulb on the leads of the capacitor.

This strategy had been utilized by many specialists about the world for the mild bulb will act as an indicator to see if the capacitor nevertheless holds the charge. If there is a demand the gentle bulb will light and soon after discharged the light-weight bulb will goes off.

3)Area the leads of a significant wattage resistor on the potential customers of the capacitor.I use a 2.2k ohm 10 watt resistor to discharge the high voltage capacitor in a switch mode energy supplies. It is basic to use and very powerful .It normally takes only pair ofseconds to thoroughly discharge the capacitor.

Summary

I strongly recommend for people who use screw driver to discharge a capacitor to swift to the next and 3rd method as these is the most secure approach to  [http://www.iamsport.org/pg/blog/fired1cafe/read/18531244/ceramic-disc-capacitor-how-to-accurately-test-it The Suitable Way To Discharge Capacitor In Switch Manner Electrical power Provides] guard the circuit and most importantly is yourself.

Within a vacuum capacitor, two metallic (copper commonly) electrodes are divided by a vacuum. The outer component of the capacitor is created from both glass or ceramic. They generally have a minimal capacitance in the range of 10 to 1000 pF and substantial voltages, typically 5000 volts and higher. Vacuum capacitors discover vast application in industrial programs of radio frequency strength. Sometimes a faulty crt socket may possibly result in this sort  [http://dahlia4olive.livejournal.com/624.html Vacuum Capacitor Apps and Added benefits] of problem also!