Voir le texte source

After you have recognized a pinhole leak inside your copper pipe, and it's above the piece it is not that hard to fix. Separate the flow, and turn the water off to the house, both at the device where it comes in or at the water meter by the street.If you turn it off at the house then open the hose bib that is often found just above the water shut off. This may releive any pressure from the inner pipes, and the leak must stop leaking.  [http://ezlocal.com/fl/palm-beach/roofing-contractor/143856 roof restoration contractor]  The next thing you need is to get the elements to stop the leak. When it is a pinhole leak all you have to is a small bit of soft rubber, and a pipe clamp. Try to find a hold that's near to the size of the pipe. You are able to often find these at the local hardware or auto parts store. Be sure the plastic is soft therefore it will close the flow if you tighten the hold. Do NOT over tighten the clamp or you could break the tube and have a leak. Trust me I've done this. Place the plastic over the opening and secure the hold. Change the water right back on and always check the leak when you think you have it tight enough. If it's stopped dripping then you're done and you're now a plumber. If not gradually tighten the clamp before leak stops. Remember do NOT over tighten the hold. In this instance a little surpasses too much. Hopefully this will be the final leak you will have, but chances are it'll perhaps not be. I can practically guarantee you that you'll have more if you live in Florida where I live. However now you know how-to repair above the slab pinhole leaks.  [https://www.facebook.com/Roofpbc my roofing contractor]   [http://www.roofpbc.com/roofing-contractors-boca-raton-fl/ roofing contractors boca raton florida information]  Paul Webb will be the owner of Electro Service Company and is doing various repairs around the home and business for over thirty years. You can visit his website at  [http://citysquares.com/b/jm-contractors-19942581 consumers]