Voir le texte source

In NewCS it's no spaces, such as :-<br>072A86FF<br><br>In CCcam you specify the reader first then this boxkey and it has a space after each byte, to provide an example :-<br>BOXKEY: /dev/sci0 07 2A 86 FF<br><br>Available Options to use a card.<br><br>Internal Dreambox Reader.<br>Smargo Smartreader+<br>Omnikey 3121<br>The program you will need to use differs from the others somewhat based upon the various readers pick.<br><br>Using the internal reader there is the subsequent alternatives to run the card.<br><br>CCcam 2.1.3 will run the card perfectly and will also up-date the entitlements without any subsequent further intervention. Accounts are different on how heated a card may get but there isn't any reports whatsoever of any one burning the card.<br>NewCS 1.67 RC1 will host the card very well. Even so, if you are using CCcam in order to connect to the NewCS server, it won't up-date the card. For you to bring up to date the card you require at least one client connected working with MGCamd. That can be the exact same box, or another one.<br><br>Use the smargo reader<br><br>CCcam 2.1.3 will run the card perfectly and will also update the entitlements without any further involvement.<br>NewCS 1.67 RC1 will host the card very well. However, if you use CCcam for connecting to the NewCS server, it will NOT update the card. In order to update the card you need to have at least one client connected utilizing MGCamd. That may be exactly the same box, or any other one. Make sure you utilize proper binary file containing USB support when using the Smargo reader. Any time you install NewCS 1.67 from your Dreambox 600 addons panel, its likely the Omnikey reader will likely not work together with that version. Within the official NewCS release zip file, the file you should have for that Amiko is named newcs.ppc.usb for enigma1 boxes or newcs.mips.usb for enigma2 receivers. Yourrrll install this manually and relabel it or edit any cam scripts to suite.<br><br>Use the Omnikey Reader<br><br>NewCS will be only accessible option when you use this reader as CCcam does not support PCSC type readers. NewCS 1.67 RC1 will host the card perfectly well. Yet, when you use CCcam to connect on the NewCS server, it will NOT update the card. If you want to bring up to date the card you must have at least one client connected using MGCamd. Which can be the same box, or another one. Make certain you use the correct binary file containing PCSC support while using the Omnikey reader. Should you install NewCS 1.67 from the Dreambox addons panel, its very likely the Omnikey reader won't work together with that version. Through official NewCS release zip file, the file that you need for that Spiderbox is referred to as newcs.ppc.pcsc for enigma1 receivers or newcs.mips.pcsc for enigma2 boxes. You'll need to install this manually and rename it or edit any cam scripts to suite. Lastly, don't forget to install the PCSC drivers to your Technomate ahead of trying to make use of an Omnikey reader. You can find a new guide relating to  on this informative internet site [http://www.satellitecardsharing.com/cardshare-providers/ best cccam version server]. This approach technique also will work to Cccam.