Voir le texte source

If you program to visit Germany and you take your American appliances there are a few issues you should look into. 1st you have to know that most American appliances are developed to run off of 110 volts and Most German appliances are made to run off of 220 volts. Identify further on this affiliated site by visiting  [https://www.youtube.com/watch?v=nBTWK4JZ5ts human resources manager] . This implies that if you plug an American stereo, razor, pc, and so on into a German outlet it will destroy it!! The prongs are various so it is difficult to make this error but outlet adapters are sold and this does come about often. The reason the adapters are sold is due to the fact some American appliances are Dual-Voltage and can run off of 110 or 220. To find out if your appliance is Dual-Voltage you should look at the energy info on the appliance, either on the appliance itself or on the energy box on the cord. Discover more on our partner paper by clicking  [https://www.youtube.com/watch?v=Y1H58wRKTE0 guide to energy saving device] . If you still havent found the information refer to your users manual. This majestic  [http://www.youtube.com/watch?v=frxQmDIzdh4 go here]  use with has many original tips for why to see about it. If your appliance is not dual voltage the only alternative you have in order to use it in Germany is to obtain a energy converter. Power converters can be bought on the globe-wide web (of course), or select appliance and hardware stores. If you are somehow permitted access to a U.S. Army base in Germany, you can purchase 1 at the Post Exchange. When selecting your power converter be positive that it is converting 220 volts to 110 volts and not the other way around. Subsequent, you need to have to select the size of the energy converter in which you will need to have for your device(s) this ought to be relatively self explanatory. Check the energy output of the device and be certain it is equal to or beneath, beneath is recommended, the voltage of the converter. Employing specific clocks/alarm clocks can run slower or more quickly than usual even if the clock is dual-voltage. The only way to keep away from this is to be confident the clock is of great high quality and relatively new. If the clock is plugged into a energy converter this ought to not be an problem. Clicking  [https://www.youtube.com/watch?v=ajzRC9gCVQ0 electric saver]  possibly provides suggestions you can give to your boss.