Voir le texte source

Freezing or Glitchy picture. This really is brought on when working the Sky Digital card in NewCS whenever Global Access EMM's aren't blocked. Be sure to specify the blockGA parameter to YES. A slow ECM time in excess of 0.400 seconds will likely lead to this difficulty though we have got no real evidence of what really creates a poor response time when making use of a local card. Opinions for this please ?<br><br>Entitlements Not Updating. Mentionened above previously, if you use CCCam it is important to have one or more client connected using MGCamd and taking advantage of the AU parameter = 1 in the mf.cfg config file. This will certainly allow MGCamd to change the entitlements.<br><br>Entitlements in CCCam definitely not displaying whatsoever. Your personal card is not updated together with the entitlements particular date has expired. Privided you can, restore it while in the 1st Sky reciever and put it on channel 106 ( sky1 ). Let it stay on until it comes alive, it may take upto 48 hrs !!! Should you not have original box setup an MGCamd client and check it in this way. Currently this strategy is not proved running.<br><br>CC Cam illustrates the incorrect or no CAID. This will be most likely the boxkey is drastically wrong. Be sure that you now have created the proper boxkey using the serial number of your original Sky receiver.<br><br>Config File Destinations<br><br>Displayed just below will be the files you should have to use per each setup. Pay attention to a bit of differences regarding E1 and E2 receviers. You can find more helpfiil information on pickups from [http://podcast.cooperativaikaros.org/groups/comunitadipraticadocentiikaros/wiki/61497/Using_Your_Sky_Digital_UK_Card_Along_With_Your_Technomate.html Eurocardsharing Register]. <br><br>CCcam 2.1.3 - Do the installation from the blue panel - Host & Client<br>CCcam.cfg - /etc ( E2 boxes )<br>CCcam.cfg - /var/etc ( E1 boxes )<br><br>NewCS 1.67RC1 & MGCamd 1.31 - Host & Client<br>newcs.xml - /var/tuxbox/config( All recievers )<br>mg.cfg - /var/keys ( All boxes )<br>newcamd.list - /var/keys ( All recievers )<br><br>NewCS 1.67 & CCcam 2.x.x<br>I highly recommend NOT utilizing this configuartion at this moment because you have trouible with the card entitlements running out you could have to restore the card in some other way.<br><br>Installing NewCS personally ( pcsc or usb supported binary )<br>newcs.mips.pcsc - /usr/bin ( E2 recievers )<br>newcs.ppc.pcsc /var/bin ( E1 receiversboxes ) I believe?