Voir le texte source

There are three strategies to discharge the big filter capacitor in a power supply.

1)Discharge it with a screw driver (not advisable).

The explanation for not using the screw driver to discharge a capacitor is because

-the printed circuit board or circuitry can be harm owing to the spark produced when discharging the high voltage capacitor.I as soon as blowed the electric power portion utilizing this approach. Nevertheless, if you know that the capacitor saved voltage is not way too substantial, you can simply discharge it with a smaller screw driver.

-if the capacitor retains a heavier cost of electrical power. Discharging the capacitor may soften the suggestion of the screw driver and the copper on the printed circuit board.

-Often a heavier spark may possibly bring about modest disintegrated solder lead or copper to fly out from the circuit board and may possibly injured your eyes.

2)Position the sales opportunities of a socketed 100 watt electric powered bulb on the sales opportunities of the capacitor.

This system had been applied by quite a few professionals about the earth for the mild bulb will act as an indicator to see if the capacitor nevertheless retains the cost. If there is a demand the gentle  [http://www.plus.friendite.com/blogs/259560/401285/the-appropriate-way-to-discharge The Suitable Way To Discharge Capacitor In Change Manner Electricity Supplies] bulb will gentle and after discharged the light-weight bulb will goes off.

three)Area the leads of a high wattage resistor on the qualified prospects of the capacitor.I use a two.2k ohm 10 watt resistor to discharge the high voltage capacitor in a change method electrical power provides. It is uncomplicated to use and extremely efficient .It will take only pair ofseconds to entirely discharge the capacitor.

Conclusion

I strongly propose for all those who use screw driver to discharge a capacitor to swift to the second and 3rd approach as these is the safest system to protect the circuit and most importantly is yourself.

Inside a vacuum capacitor, two metal (copper commonly) electrodes are divided by a vacuum. The outer aspect of the capacitor is created from possibly glass or ceramic. They normally have a low capacitance in the range of 10 to a thousand pF and large voltages, generally 5000 volts and increased. Vacuum capacitors discover huge application in industrial programs of radio frequency electricity. They are used in gear this sort of as significant powered broadcast transmitters, Newbie radio RF Amplifiers and massive antenna tuners. Vacuum capacitors can also be used as the impedance variation portion in automated matching. Variations of vacuum capacitors incorporate fixed and variable. The key variance among preset and variable is that variable vacuum capacitors are able to be adjusted.

Vacuum variable capacitors require to be in a position to take care of high voltages. The other option  [http://www.dailystrength.org/people/3246611/journal/7099615 The Proper Way To Discharge Capacitor In Swap Mode Power Materials] that you have is to immediate exchange the suspected capacitor. As for me, checking the modest blue resin coated ceramic disc capacitor that have the capacitor code of 104 50v, apart from making use of digital capacitance meter to check out for the benefit,  [http://www.awebcafe.com/blogs/viewstory/3136552 The Appropriate Way To Discharge Capacitor In Swap Mode Electric power Provides] i also use an analog meter established to times 10Kohm that have the output of 12v to check this kind of capacitor.