Voir le texte source

If you want to visit Germany and you get your American appliances there are always a few things you should consider. First you need to know that many American appliances are designed to run off of 110 volts and Most German appliances are designed to run off of 220 volts.  [http://www.satcoms.com/band-c-17_19_45_21.html C Band Antenna]  includes additional information about why to ponder this viewpoint. This means that if you select an American stereo, blade, computer, an such like in to a German outlet it'll eliminate it!! The prongs are different so it's difficult to make this mistake but store plugs are bought and this does happen often. The reason the plugs are offered is because some American devices are Dual-Voltage and may run off of 110 or 220. To learn if your appliance is Dual-Voltage you need to look at the power information on the appliance, often on the appliance itself or on the power field on the wire.  [http://www.satcoms.com/terrasat-c-49_51.html Ibuc Terrasat]  includes more about how to provide for this thing. If you still havent found the info reference your users manual. If your appliance is not dual voltage the only choice you've to be able to use it in Germany is always to purchase a power converter. Power converters are available on the world-wide web (needless to say), or select equipment and hardware stores. If you're somehow allowed access to a U.S. Army base in Germany, you can buy one at the Post Exchange. When selecting your energy converter be sure that it's transforming 220 volts to 110 volts and not another way around. Next, you need to select the size of the power converter where you'll need for your device( s) this should be fairly self explanatory. Be certain it is corresponding to or below and examine the power output of the product, below is recommended, the voltage of the converter. Using specific clocks/alarm clocks can run slower or faster than usual even if the clock is dual-voltage. For fresh information, we understand you check out:  [http://www.satcoms.com/band-c-77_79_219_225.html jump button] . The only way to prevent this is to make sure the time is of high quality and relatively new. If the clock is attached to a power converter this would not be a concern. Dig up more about  [http://www.satcoms.com/cdm570-c-77_79_175.html wholesale comtech cdm 570]  by visiting our dazzling article.