Voir le texte source
De WikiCinéjeu.
pour
Blade 450 RC Helicopter Assessment
Aller à :
Navigation
,
rechercher
To effectively [http://www.awebcafe.com/blogs/viewstory/2676554 RC Helicopter Blade Tracking] monitor your rotor blades, you need to have to land the hovering RC helicopter initially. If the rear blade is pursuing the entrance blade on a higher or lower airplane, then it can cause a great deal of undesirable vibrations for the RC helicopter. How To Monitor Your Blades If you are flying your RC helicopter for the first time, you need to see if the blades are tracking effectively and you may possibly will need some aid from an seasoned RC helicopter pilot. You can check out the blade monitoring by simply hovering the helicopter in place at eye amount and seeking at the blades as it hovers. If you see a whole lot of shaking and vibrating, your RC helicopter is a lot more than most likely not monitoring adequately. If you're not absolutely sure if it is really tracking properly, do this: Get two unique colors of tape and implement a tiny strip of one colour to a single blade. Put a crimson strip on one blade and a blue strip on the other blade. By making use of a unique colour on just about every blade, it makes it a ton simpler to see which blade could be out of monitor. Now that you've applied the colored tape, have an skilled RC helicopter pilot hover the helicopter in spot so that you can see the blades as they spin. As you enjoy the blades spin, you'll know if they're in monitor if you only see a solitary circle or the two blades spinning on just one line. If you see two circles or two strains, (crimson previously mentioned blue or vice versa) then you'll know that 1 of the blades are off and demands to be aligned. To appropriately observe your rotor blades, you need to land the hovering RC helicopter first. After the blades have stopped spinning, you can adjust the blade that is out of alignment. You'll will need to have your RC helicopter manual handy so that you can search up the right blade monitoring info in it. Be sure that you adjust the accurate linkages in what the guide says and not what an individual claims. This is the very best way to be absolutely sure that you've carried out it correctly. As soon as you've tightened or loosened the correct linkage or linkages, you need to have another person fly the helicopter all over again so that you can search at the blades. You will repeat this course of action as frequently as essential till your blades are tracked adequately and they spin on the same aircraft. Once you've completed correct blade tracking, your RC helicopter will take care of a good deal smoother than it did ahead of and be considerably less complicated to fly. The Blade 450 helicopter collective pitch helicopter is comparatively sturdy, relatively low-cost, and reasonably easy to fly...NOT for the beginner however [http://www.nexopia.com/users/canoedecade6/blog/2-blade-450-rc-helicopter-overview Blade 450 RC Helicopter Evaluation] . If you are a rookie you may possibly want to start out with a significantly less [http://beta.truck.net/blogs/486988/713059/blade-450-rc-helicopter-review RC Helicopter Blade Monitoring] high priced indoor coaxial heli learn the basic principles of flying a helicopter and then transfer up to the MCX, MSR or 120SR.
Revenir à la page
Blade 450 RC Helicopter Assessment
.
Affichages
Page
Discussion
Voir le texte source
Historique
Outils personnels
Créer un compte ou se connecter
Navigation
Accueil
Cinéjeu
Forum
Modifications récentes
Page au hasard
Aide
Rechercher
Boîte à outils
Pages liées
Suivi des pages liées
Pages spéciales