Voir le texte source
De WikiCinéjeu.
pour
Blade 450 RC Helicopter Review
Aller à :
Navigation
,
rechercher
RC helicopter blade monitoring has been a thriller to numerous new RC helicopter homeowners, but I'm likely to demystify the entire idea for you right [http://community.babycenter.com/journal/personorder3/10540189/blade_450_rc_helicopter_critique RC Helicopter Blade Monitoring] now so that you'll have a comprehensive knowledge of blade tracking by the time you end looking at this write-up. A different way to look at it is that each blades travel by way of the very same airspace designed by their spinning. If the rear blade is pursuing the entrance blade on a larger or reduce aircraft, then it can cause a good deal of undesirable vibrations for the RC helicopter. How To Observe Your Blades If you're traveling your RC helicopter for the very first time, you need to see if the blades are monitoring properly and you may well need to have some aid from an expert RC helicopter pilot. You can check out the blade monitoring by only hovering the helicopter in place at eye stage and hunting at the blades as it hovers. If you see a good deal of shaking and vibrating, your RC helicopter is more than very likely not tracking correctly. If you are not certain if it really is tracking effectively, do this: Get two unique shades of tape and implement a tiny strip of just one coloration to 1 blade. Set a red strip on 1 blade and a blue strip on the other blade. By utilizing a distinct shade on every single blade, it tends to make it a great deal less difficult to see which blade may possibly be out of observe. Now that you've utilized the coloured tape, have an experienced RC helicopter pilot hover the helicopter in spot so that you can see the blades as they spin. As you view the blades spin, you'll know if they're in keep track of if you only see a one circle or both equally blades spinning on just one line. If you see two circles or two lines, (purple earlier mentioned blue or vice versa) then you will know that 1 of the blades are off and wants to be aligned. To effectively keep track of your rotor blades, you will need to land the hovering RC helicopter first. Immediately after the blades have stopped spinning, you can modify the blade that is out of alignment. You will want to have your RC helicopter manual helpful so that you can glance up the correct blade monitoring facts in it. Be sure that you modify the proper linkages in what the manual suggests and not what a person says. This is the greatest way to be positive that you have accomplished it effectively. After you have tightened or loosened the right linkage or linkages, you need to have to have another person fly the helicopter all over again so that you can appear at the blades. The moment [http://kampusagi.com/index.php?p=blogs/viewstory/492996 Blade 450 RC Helicopter Critique] you have mastered these then flying the Blade 450 3D studying curve will be a lot much less and your expertise will be more fulfilling and much less high-priced. If you are a beginner you may possibly want [http://www.myfaceclick.com/blog/189996/blade-450-rc-helicopter-overview/ RC Helicopter Blade Tracking] to start out out with a a lot less high priced indoor coaxial heli learn the principles of traveling a helicopter and then go up to the MCX, MSR or 120SR.
Revenir à la page
Blade 450 RC Helicopter Review
.
Affichages
Page
Discussion
Voir le texte source
Historique
Outils personnels
Créer un compte ou se connecter
Navigation
Accueil
Cinéjeu
Forum
Modifications récentes
Page au hasard
Aide
Rechercher
Boîte à outils
Pages liées
Suivi des pages liées
Pages spéciales