Voir le texte source
De WikiCinéjeu.
pour
Blade 450 RC Helicopter Evaluation
Aller à :
Navigation
,
rechercher
1st, we need to have to reply this essential concern: What is blade tracking? Primarily, blade monitoring is when 1 rotor blade rotates in a round motion and the adhering to blade follows particularly guiding it. Equally rotor blades spin on the very same airplane devoid of 1 blade currently being greater or reduce than the blade it's adhering to. Yet another way to glance at it is that each blades travel by means of the very same airspace developed by their spinning. If the rear blade is following the front blade on a increased or lower aircraft, then it can result in a great deal of unwelcome vibrations for the RC helicopter. If you see [http://www.addabazz.com/index.php?p=blogs/viewstory/1301122 Blade 450 RC Helicopter Evaluation] two circles or two traces, (red previously mentioned blue or vice versa) then you will know that one particular of the blades are off and wants to be aligned. This is the ideal way to be sure that you've completed it [http://beta.truck.net/blogs/486988/713050/rc-helicopter-blade-tracking RC Helicopter Blade Monitoring] appropriately. If the rear blade is pursuing the front blade on a increased or lower aircraft, then it can lead to a good deal of undesirable vibrations for the RC helicopter. How To Monitor Your Blades If you're traveling your RC helicopter for the first time, you need to have to see if the blades are monitoring properly and you may well need some aid from an knowledgeable RC helicopter pilot. You can test the blade monitoring by simply hovering the helicopter in spot at eye level and hunting at the blades as it hovers. If you see a lot of shaking and vibrating, your RC helicopter is far more than probable not tracking correctly. If you're not confident if it really is monitoring appropriately, do this: Get two diverse colours of tape and use a tiny strip of one shade to 1 blade. Place a purple strip on one particular blade and a blue strip on the other blade. By making use of a different shade on each blade, it would make it a ton less difficult to see which blade could be out of keep track of. Now that you've used the colored tape, have an seasoned RC helicopter pilot hover the helicopter in area so that you can see the blades as they spin. As you observe the blades spin, you'll know if they're in keep track of if you only see a single circle or the two blades spinning on one particular line. If you see two circles or two traces, (purple previously mentioned blue or vice versa) then you'll know that just one of the blades are off and demands to be aligned. To appropriately observe your rotor blades, you will need to land the hovering RC helicopter initially. Following the blades have stopped spinning, you can change the blade that is out of alignment. You'll require to have your RC helicopter manual useful so that you can search up the right blade tracking info in it. Most of the [http://www.myfaceclick.com/blog/189996/blade-450-rc-helicopter-overview/ Blade 450 RC Helicopter Critique] areas for the Blade 450 3D are manufactured of plastic even though the major rotor blades are manufactured of wooden.
Revenir à la page
Blade 450 RC Helicopter Evaluation
.
Affichages
Page
Discussion
Voir le texte source
Historique
Outils personnels
Créer un compte ou se connecter
Navigation
Accueil
Cinéjeu
Forum
Modifications récentes
Page au hasard
Aide
Rechercher
Boîte à outils
Pages liées
Suivi des pages liées
Pages spéciales