Voir le texte source
De WikiCinéjeu.
pour
RC Helicopter Blade Monitoring
Aller à :
Navigation
,
rechercher
If you are flying your RC helicopter for the very first time, you want to see if the blades are monitoring adequately and you may well need to have some assist from an knowledgeable RC helicopter pilot. You can examine the blade tracking by basically hovering the helicopter in position at eye level and hunting at the blades as it hovers. If you see a ton of shaking and vibrating, your RC helicopter is more than likely not monitoring adequately. If you're not positive if it is really tracking correctly, do this: Get two unique colours of tape and utilize a little strip of one particular color to one particular blade. Set a pink strip on one blade and a blue strip on the other blade. By working with a various coloration on each blade, it tends to make it a great deal less difficult to see which blade may possibly be out of track. Now that you've applied the colored tape, have an expert RC helicopter pilot hover the helicopter in area so that you can see the blades as they spin. As you view the blades spin, you'll know if they're in keep track of if you only see a single circle or the two blades spinning on one particular line. If you see two circles or two traces, (red higher than blue or vice versa) then you are going to know that just one of the blades are off and needs to be aligned. To appropriately keep track of your rotor blades, you need to land the hovering RC helicopter initial. Immediately after the blades have stopped spinning, you can regulate the blade that is out of alignment. You'll will need to have your RC helicopter manual helpful so that you can appear up the right blade tracking details in it. Be sure [http://www.nexopia.com/users/canoedecade6/blog/1-rc-helicopter-blade-tracking RC Helicopter Blade Tracking] that you regulate the right linkages in what the manual suggests and not what someone states. This is the best way to be sure that you have accomplished it properly. When you have tightened or loosened the right linkage or linkages, you need to have to have somebody fly the helicopter yet again so that you can look at the blades. You'll repeat this process as generally as wanted till your blades are tracked properly and they spin on the very same plane. When you've accomplished suitable blade tracking, your RC helicopter will handle a good deal smoother than it did just before and be considerably easier to fly. RC helicopter blade monitoring has been a thriller to a lot of new RC helicopter proprietors, but I'm heading to demystify the full strategy for you appropriate now so that you'll have a total comprehending of blade tracking by the time you end reading this short article. First, we need to have to answer this significant question: What is blade tracking? This is an out of the box completely ready [http://www.addabazz.com/index.php?p=blogs/viewstory/1301122 Blade 450 RC Helicopter Critique] to fly awesome helicopter for the intermediate to sophisticated heli pilot. In conclusion, I would recommend this helicopter to any intermediate to knowledgeable heli [http://community.babycenter.com/journal/personorder3/10540189/blade_450_rc_helicopter_critique RC Helicopter Blade Monitoring] pilot wanting to transfer up and get into collective pitch helicopters.
Revenir à la page
RC Helicopter Blade Monitoring
.
Affichages
Page
Discussion
Voir le texte source
Historique
Outils personnels
Créer un compte ou se connecter
Navigation
Accueil
Cinéjeu
Forum
Modifications récentes
Page au hasard
Aide
Rechercher
Boîte à outils
Pages liées
Suivi des pages liées
Pages spéciales