Voir le texte source

Freezing or Glitchy picture. This is caused when operating the Sky UK card in NewCS whenever Global Access EMM's aren't blocked. You should set the blockGA parameter to YES. A slow ECM time in way over 0.400 seconds may even bring about this condition even though we have no real verification of what definitely leads to a slower response time when working with a local card. Opinions for this please ?<br><br>Entitlements Not Updating. Mentioned previously, if you are using NewCS it's essential to have some form of client connected by using MGCamd and making use of the AU parameter = One in the mf.cfg config file. Doing this will let MGCamd to update the entitlements.<br><br>Entitlements in CCCam not really displaying at all. Ones card has not been up-to-date as well as the entitlements particular date has past. If you can, restore it in your genuine Sky reciever and put it on channel 106 ( sky1 ). Let it stay on till it appears alive, it might take upto 48 hours !!! If you fail to have original box setup an MGCamd client and try it like that. At this point this technique isn't really verified working.<br><br>CCCam illustrates an unacceptable or no CAID. This really is likely the boxkey is entirely wrong. You need to have created the right boxkey making use of the serial number from your very own original Sky box.<br><br>Config File Places<br><br>Displayed below will be files that is required to run per configuration. Take note of a bit of differences concerning E1 and E2 boxes. You can find more helpfiil information on unsalvableness from [http://www.Fr.Curriculumforge.org/ThereseRo Cccam dbox2 download]. <br><br>CCcam 2.1.3 - Do the installation within the blue panel - Host & Client<br>CCcam.cfg - /etc ( E2 boxes )<br>CCcam.cfg - /var/etc ( E1 boxes )<br><br>NewCS 1.67RC1 & MGCamd 1.31 - Host & Client<br>newcs.xml - /var/tuxbox/config( All boxes )<br>mg.cfg - /var/keys ( All boxes )<br>newcamd.list - /var/keys ( All boxes )<br><br>NewCS 1.67 & CCcam 2.x.x<br>I strongly recommend NOT employing this configuartion at this time because you will have trouble with the card entitlements running out and you'll have to restore the card some other way.<br><br>Installing CC Cam manually , ( pcsc or usb supported binary )<br>newcs.mips.pcsc - /usr/bin ( E2 recievers )<br>newcs.ppc.pcsc /var/bin ( E1 boxes ) I'm sure?